
|



Dual Group 27 Sliding Battery Box on BOUNDER Plus H-Frame
STD BBOXD27 |
Standard dual group 27 sliding battery box (standard - no up charge) |
BBOXD27 THIN |
Thin profile dual group 27 battery box (adds 1" of ground clearance). For use on conventional frame chairs only. Required with most power seating systems as well as chairs with low seat heights. |
BBOX24 |
Dual group 24 sliding battery box |
BBOX22NF |
Dual group 22NF battery box |
CUS BBOX |
Custom battery box. Boxes for group 24, 22NF and U1 batteries can be made. Single, dual and triple boxes as well as dual plus single can sometimes be installed. Most custom battery boxes are made of sheet metal (steel) and powder coated black. They may or may not utilize slides. |
MPC BBOXDU1 |
Manual chair or gurney dual U1 battery box. |

Dual Group 22NF Battery Box on Extra Narrow 21.5" Overall Base Width H-Frame
BA27 GEL-CELL |
Install pair of group 27 deep cycle gel-cell batteries |
BA24 GEL-CELL |
Install pair of group 24 deep cycle gel-cell batteries |
BAU1 GEL-CELL |
Install one U1 gel-cell battery |
MC BCDM8 |
Supply a dual mode 8A Lester gel-cell / conventional lead acid battery charger for a manual chair or gurney with a battery box and power seating system (up charge on manual chairs & gurneys). |
BCDM12 | Dual mode 12A Lester gel-cell / conventional lead acid battery charger (instead of 8A). Includes on/off switch, mode switch and LED status display. There is no ammeter on the 12A charger. |
BCDM12W |
Dual mode 12A Lester World-Wide gel-cell / conventional lead acid battery charger (instead of 8A). Includes on/off switch, mode switch and LED status display. There is no ammeter. For use in countries other than the United States and Canada. |
NBC |
No battery charger credit (power chairs and gurneys only) |