21st Century Scientific, Inc.

POWER SEATING SYSTEM COMBINATIONS

Many power seating systems can be combined on the same chair.  Below are a few examples of the many combinations available. Some power seating systems cannot be combined with others for various reasons. Contact the factory to discuss your needs and we will be more then happy to review the features and options available.

COMBINATIONS

SEAT ELEVATE and TILT

PSE2 13 and PTS 50

PSE2 in up position PSE2 in up and tilt position
Power Seat animated gif

BOUNDER Plus H-Frame with:
13” Power Seat Elevator (PSE2 13)
and
50 Degree Power Tilt (PTS 50)

For users under 250 pounds
Long Base required
21” seat height or higher required

SEAT ELEVATE and TILT-custom mount

PSE2 13 and PTS 50 with CUSTOM back mounted actuator
Custom Back Mounted Power Tilt System, seat elevated Custom Back Mounted Power Tilt System seat tilted
BOUNDER Plus H-Frame with:
13” Power Seat Elevator (PSE2 13)
and
50 Degree Power Tilt (PTS 50) (custom back mounted tilt actuator)

For users under 150 pounds:
The tilt actuator is mounted on the back of the chair so that when combined with a seat elevate system, a short base can be used.

SEAT ELEVATE, TILT and RECLINE

PSE2 13, PTS 50 and PRS 80

 Elevate, Tilt and Recline

BOUNDER Plus H-Frame with:
13” Power Seat Elevator (PSE2 13),
50 Degree Power Tilt (PTS 50)
and
80 Degree Power Recline (PRS 80)

For users under 250 pounds
Long Base required
21” seat height or higher required

TILT and RECARO®

PTS 50 and RECARO® ES

Recaro@ ES with 30 degree power tilt Recaro and tilt



BOUNDER Plus H-Frame with:
50 Degree Power Tilt (PTS 50)
and
Recaro® ES Power Seating System

Bounder with leather Recaro® seat, tilt and recline animation

BOUNDER Plus Conventional Frame with:
50 Degree Power Tilt (PTS 50)
Recaro ES Power Seating System
and
Dual Independent Power Elevating Legrests (DIPLR)

 

SEAT ELEVATE, REVERSE TILT, ELEVATING LEGRESTS, and RECARO® ES

PSE2 13, RPTS 30 , DIPLR and RECARO® ES
 

Animated gif of seat elevate, reverse tilt and power legrests
This is an animated gif illustrating some of the functions of this BOUNDER Plus


BOUNDER Plus H-Frame with:


Video: Power Seat elevating

BOUNDER Plus with Recaro, PSE2, RPTS, DIPLR


Video: Reverse Tilt

 

REVERSE TILT, RECLINE and POWER LEGRESTS

RPTS 30, PRS 80 and DIPLR

Reverse tilt, recline & power legrest animation

BOUNDER Plus H-Frame with:
30 Degree Reverse Power Tilt (RPTS 30),
80 Degree Power Recline (PRS 80) and
Dual Independent Power Leg Rests (DIPLR)

RPTS DIPLR Lockout required. This prevents the legrests from elevating when the seat is tilted forward.

POWER FRONT LOAD, SEAT ELEVATE, and TILT

PFLS, PSE2 13, and PTS 50

Front Load with custom center mount adjustable footboard Front Load with optional seat elevator and tilt

Power Front Load System extend out and down

BOUNDER Plus H-Frame with:
Power Front Load System (PFLS),
13” Power Seat Elevator (PSE2 13),
and
50 Degree Power Tilt (PTS 50)

Power Latitude Seating System can be combined with Power Seat Elevator 2 (PSE2) and Power Tilt System (PTS). Some limitations apply:  The user cannot operate the elevate or tilt options when the seat is extended forward and cannot extend the seat forward if elevated or tilted. The user cannot drive the chair when the seat is extended forward.

22” Seat-to-Floor Height or higher is required
Long Base Required

POWER STAND and TILT

PSTAND and PTS 50

Animated gif of tilt and stand

BOUNDER Plus H-Frame with:
Power Standing System (PSTAND)
and
50 Degree Power Tilt (PTS 50)

Long Base required
21” seat height or higher is required

POWER STAND and RECLINE

PSTAND and PRS 80

Power Stand and Recline in standing position Power Stand and Recline in recline position

BOUNDER Plus H-Frame with:
Power Standing System (PSTAND)
and
80 Degree Power Recline (PRS 80)

Long Base required
21” seat height or higher is required
No pictures or graphics on this website may be used without permission of 21st Century Scientific, Inc.